« Edellinen

DL112

DL105X

Sounder:
Maximum output: 119dB(A) @ 1 metre [110dB(A) @ 10ft/3m]
Nominal output: 112dB(A) @ 1m +/- 3dB – Tone 2 [103dB(A) @ 10ft/3m]
No. of tones: 45 (UKOOA / PFEER compliant)
No. of stages: 3
Volume control: Max. 112dB(A); Min. 100dB(A) – Tone 2
Effective range: 125m/410ft @ 1KHz
Stage switching: Negative
Reverse polarity stage switching on DC units.
Beacon: xenon
Energy: 5 Joules (5Ws)
Flash rate: 1Hz (60 fpm)
Peak Candela: 500,000 cd – calculated from energy (J)
Effective Intensity cd: 250 cd – calculated from energy (J)
Peak Candela: 86,935 cd* – measured ref. to I.E.S.
Effective Intensity cd: 200 cd* – measured ref. to I.E.S.
Lens colours: Amber, Blue, Clear, Green, Red & Yellow
Tube life: Emissions are reduced to 70% after 8 million flashes
General:
Voltages DC: 12Vdc; 24V dc; 48V dc
[24V dc units can use 24V ac for single stage applications].
Voltages AC: 24V ac; 115V ac; 230V ac
Ingress protection: IP66, Type 4 / 4X / 3R
Housing material: Marine grade aluminium A1 Si12 Cu
Colour: Red (RAL3000), grey (RAL7038)
Cable entries: 2 x M20 x 1.5mm threaded gland entries supplied with one stoppoing plug
Terminals: 0.5 to 4.0mm² cables.
Operating temp: -25 to +55°C [-13° to +131°F]
Storage temp: -40 to +70°C [-40° to +158°F]
Relative humidity: 90% at 20°C [68°F]
Weight: DC: 2.80kg/6.16Ibs AC:3.10kg/6.82Ibs
*Candela measurements representative of performance with clear lens at optimum voltage.
*SPL data +/-3dB(A). Measured at optimum voltage.
Beacon: LED
Light source: High intensity L.E.D. array
24 x Superflux type high output L.E.D’s
Flash options: Steady or 2Hz flash mode (on board select)
Peak/Effective Intensity cd: Green L.E.D: 176cd – measured ref. to I.E.S.
L.E.D. colours: Amber, Blue, White, Green & Red
Lens colour: All L.E.D. colours use a Clear lens to maximise output and to ensure the signal is most effective in high ambient light levels.